VSH
Home / Services / Trash compactor
Service

Trash compactor repair

Most compactor calls start with something you can check in two minutes: the latch, the key-knob, a drawer that is not quite closed. When those check out, the switches and the drive are next.

Price agreed before we start Family owned since 2015 Open 6 days, Sunday included

How a working compactor behaves

The ram is the plate that presses the trash down, and it never travels to the bottom of the drawer. Whirlpool's product help says the ram stops 7 inches above the bottom and that the drawer must be more than half full before trash begins compacting. A compactor that seems to do nothing for the first few loads of a new bag is often working exactly as designed.

Whirlpool also says the trash in a full bag ends up about one quarter of its original bulk, and that strong glass bottles may not break at all. On its troubleshooting page, Whirlpool adds that the thickness of the glass and the trash underneath may keep a bottle from breaking. One rule from the How It Works page is worth repeating for anyone with kids in the house: do not push items down into the compactor with hands or feet.

When it does nothing at all

Whirlpool's checklist for a compactor that will not start begins outside the machine. The cord needs a grounded 3 prong outlet, and Whirlpool points out that the outlet may be controlled by a wall switch that was meant for a garbage disposal. In a kitchen where the disposal and the compactor sit side by side under the counter, flipping the wrong switch is an easy mistake to make.

Next come the breaker or fuse, then the drawer. It has to be completely closed, with the latch pressed down into the locked position. On models with a key-knob, the knob has to be at ON. Whirlpool's checklist then says to press the foot-actuated start button in with your toe, and on some models the cycle starts by lifting the foot pedal instead.

If all of that checks out and there is still no sound, the problem is inside the cabinet. On one Whirlpool model, the TU8750XXP0, the parts diagram lists a directional switch as its own part and groups the internals into motor and drive, power screw and ram, and panel and control. Telling a failed switch from a motor problem takes a meter and the cabinet panels off, which is where a homeowner's checks end and a service call begins.

The ram goes down, then comes straight back up

This is the most specific symptom a compactor has. Whirlpool explains that once the drawer switch disengages, the ram returns to the top without completing the cycle. The causes Whirlpool lists are ordinary: a latch that is not locked, a drawer that is not completely closed, where Whirlpool suggests checking the drawer tracks for debris, and bulky items loaded off center, which could push on the drawer front.

Whirlpool's loading advice follows from that. Bottles and cans go on their sides in the center of the drawer, and bottles never go in upright. Bottles or cans placed off center may get caught between the ram and the drawer, and the Drawer Monitor Switch then senses a missload and sends the ram back up. If the drawer is closed, latched and loaded in the center and the ram still reverses every time, we test the switch itself next.

Drawer stuck shut

Whirlpool states that the drawer will open only when the ram is fully raised. On key-knob models, turning the knob to START and releasing it raises the ram. On push-button models, Whirlpool says to press OFF and then ON.

Some models also have a Solid or Compress cycle that holds the ram down on purpose, so the trash does not spring back, and Whirlpool says regular use can increase bag capacity by up to 25 percent. While the ram is down in that cycle, the drawer is locked. How the cycle releases depends on the model: one Whirlpool page says by lifting the foot pedal, another by pressing the foot-actuated START button. The owner's manual for your model settles which one applies.

Whirlpool's own cautions fit here. Disconnect power before inspecting, and do not force the drawer if the ram might be down. Whirlpool also suggests running a flashlight along both rails for wedged glass, metal lids or bulky bags, and removing debris carefully so the tracks and rollers do not bend.

The smell

Compactors with an air filter use a fan and a charcoal filter that sits under a filter cover. Whirlpool notes that the air filter only works when the key-knob is in the On position, and that a noise while the compactor is not in use may simply be the fan left on. The filter pulls out by its top edge once the cover is released.

KitchenAid's care guidance is to replace charcoal filters as the user guide directs, use baking soda for added deodorizing, and unplug the compactor before cleaning. It also says to clean the drawer interior and ram shield with a damp cloth and never spray water into the cabinet. Loading matters too: Whirlpool lists raw meat, fish, grapefruit rinds, disposable diapers and personal hygiene items as things not to compact, and says to wrap wet or messy trash.

What we check on a visit

A service call starts with the same checks listed above, because a latch or a switched outlet costs nothing to rule out. Past that, the work is on parts like the ones the TU8750XXP0 diagram lists, such as the directional switch, the drive gears and power nut, the power screw and ram assembly and the drawer rollers, plus the drawer switch described in Whirlpool's troubleshooting. A ram jammed on something that should never have gone in is an extraction job first and a parts question second.

We service built-in compactors and handle installation when a unit is being replaced. You get the price before any work starts.

Questions we get

Why does my trash compactor not seem to compact anything?

Whirlpool's product help says the compactor ram stops 7 inches above the bottom of the drawer and that the drawer must be more than half full before trash begins compacting. The first few loads in a fresh bag often look untouched for that reason.

Why does the ram go down and then come right back up?

According to Whirlpool, once the drawer switch disengages, the ram returns to the top without completing the cycle. The causes Whirlpool lists are a latch that is not locked, a drawer that is not completely closed, and bulky items loaded off center, which could push on the drawer front.

My compactor drawer will not open. What should I try?

Whirlpool says the drawer opens only when the ram is fully raised. On key-knob models, turn the knob to START and release it. On push-button models, press OFF and then ON. Whirlpool also says to disconnect power before inspecting and not to force the drawer if the ram might be down.

Why does my compactor smell even when it is empty?

On models with an air filter, Whirlpool's guidance is to set the Air Filter switch to ON, which runs a fan and only works with the key-knob On, and to replace the charcoal filter that sits under the filter cover. KitchenAid's care guidance adds baking soda for extra deodorizing. Whirlpool also lists raw meat, fish, grapefruit rinds, disposable diapers and personal hygiene items as things not to compact.

Do you still work on trash compactors?

Yes. VSH services and installs built-in trash compactors across the West San Fernando Valley, and the price is agreed before any work starts.

Sources

Where we work

Book a technician

Tell us the appliance and what it is doing. The price is agreed before any work starts, and we are open Sunday.

Call nowBook